Jak používat ESP32 DAC sine/cosine waveform generator pomocí Arduino / PlatformIO

ESP32 a jeho deriváty jako ESP32-S2 mají built-in sine/cosine waveform generator pro built-in 8-bit DAC.

Použití vyžaduje ESP-IDF v5.1+ (viz official example). Použití s Arduino je slightly harder, protože stable version arduino-esp32 framework v době psaní tohoto postu je based na ESP-IDF v4.4, který neposkytuje DAC cosine generator API.

Proto musíme explicitně specify arduino-espressif32 version (git commit) v platformio.ini:

platformio.ini

[env:esp32dev]
platform = espressif32
# Commit f9cddfde697b659b9e818ec514f1505d2bd4a8ae is branch esp-idf-v5.1-libs @2022-02-01
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#f9cddfde697b659b9e818ec514f1505d2bd4a8ae
board = esp32dev
framework = arduino

[env:esp32dev]
platform = espressif32
# Commit f9cddfde697b659b9e818ec514f1505d2bd4a8ae is branch esp-idf-v5.1-libs @2022-02-01
platform_packages = framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#f9cddfde697b659b9e818ec514f1505d2bd4a8ae
board = esp32dev
framework = arduino

Příklad main source code je pretty simple:

main.cpp

#include <Arduino.h>
#include <driver/dac_cosine.h>

void setup() {
    dac_cosine_handle_t chan0_handle;
    dac_cosine_config_t cos0_cfg = {
        .chan_id = DAC_CHAN_1, // GPIO26
        .freq_hz = 1000,
        .clk_src = DAC_COSINE_CLK_SRC_DEFAULT,
        .atten = DAC_COSINE_ATTEN_DEFAULT,
        .phase = DAC_COSINE_PHASE_0,
        .offset = 0,
        //.flags.force_set_freq = false,
    };
    ESP_ERROR_CHECK(dac_cosine_new_channel(&cos0_cfg, &chan0_handle));
    ESP_ERROR_CHECK(dac_cosine_start(chan0_handle));
}

void loop() {
  // put your main code here, to run repeatedly:
  delay(1000);
}

#include <Arduino.h>
#include <driver/dac_cosine.h>

void setup() {
    dac_cosine_handle_t chan0_handle;
    dac_cosine_config_t cos0_cfg = {
        .chan_id = DAC_CHAN_1, // GPIO26
        .freq_hz = 1000,
        .clk_src = DAC_COSINE_CLK_SRC_DEFAULT,
        .atten = DAC_COSINE_ATTEN_DEFAULT,
        .phase = DAC_COSINE_PHASE_0,
        .offset = 0,
        //.flags.force_set_freq = false,
    };
    ESP_ERROR_CHECK(dac_cosine_new_channel(&cos0_cfg, &chan0_handle));
    ESP_ERROR_CHECK(dac_cosine_start(chan0_handle));
}

void loop() {
  // put your main code here, to run repeatedly:
  delay(1000);
}

Pokud chcete vidět, jak generated waveform vypadá na oscilloskopu, viz Jak vypadá ESP32 DAC cosine generator waveform na osciloskopu?