TechOverflow Logo
TechOverflow

如何使用 snmpclient 列出 Planet WGS-6325-8UP2X 交换机设置

English Deutsch 简体中文

Planet WGS-6325-8UP2X 交换机是可使用 SNMP 配置的受管交换机。

首先，通过 System -> SNMP -> System Configuration -> Enabled 启用 SNMP。不要忘记应用

Planet WGS enable SNMP

以下命令展示如何使用 snmpclient 工具列出交换机设置。

之后，可以简单地使用以下命令重置

snmpwalk_example.sh
snmpwalk -v1 -c public 10.56.33.4

这将按顺序打印所有（许多）SNMP 条目：

snmpwalk_output.txt
SNMPv2-MIB::sysDescr.0 = STRING: PLANET, WGS-6325-8UP2X, IE L3 Managed PoE++ Switch, v1.2112b231002
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.10456.9.99
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (14045243) 1 day, 15:00:52.43
SNMPv2-MIB::sysContact.0 = STRING: Default Contact
SNMPv2-MIB::sysName.0 = STRING: WGS-6325-8UP2X
SNMPv2-MIB::sysLocation.0 = STRING: Default Location
SNMPv2-MIB::sysServices.0 = INTEGER: 3
IF-MIB::ifNumber.0 = INTEGER: 11
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.1000001 = INTEGER: 1000001
IF-MIB::ifIndex.1000002 = INTEGER: 1000002
IF-MIB::ifIndex.1000003 = INTEGER: 1000003
IF-MIB::ifIndex.1000004 = INTEGER: 1000004
IF-MIB::ifIndex.1000005 = INTEGER: 1000005
IF-MIB::ifIndex.1000006 = INTEGER: 1000006
IF-MIB::ifIndex.1000007 = INTEGER: 1000007
IF-MIB::ifIndex.1000008 = INTEGER: 1000008
IF-MIB::ifIndex.1000009 = INTEGER: 1000009
IF-MIB::ifIndex.1000010 = INTEGER: 1000010
Check out similar posts by category: Networking, SNMP