用 WebGPU 渲染方向立方体导航工具栏

方向立方体工具栏是 CAD 查看器(如 FreeCAD 的导航立方体)里那一排小 3D 立方体,每个立方体高亮不同的面。点击某个立方体把主 3D 视图对齐到那个方向——顶视图、前视图、右视图、等轴等。与上一篇里单个可拖动的方向立方体不同,这个组件是按钮网格:七个立方体渲染到同一个 canvas,每个都预旋转到相同的等轴视角,但高亮不同的面。

下面的实时演示加载 /scripts/direction-cubes-webgpu.js。点击任意立方体,选中的方向会显示在 canvas 下方。

工作原理

组件是单个自包含脚本。除了上一篇里基本的 WebGPU 初始化之外,有意思的部分是:

  1. 一个 canvas,viewport 切出七个立方体。 单个渲染通道画全部七个立方体。每个立方体 draw 调用前,pass.setViewport() 和 pass.setScissorRect() 把渲染限制在该立方体的网格单元。这比七个独立 canvas 或七个渲染通道便宜得多。
  2. 一个 bind group,动态 uniform 偏移。 所有立方体共享同一个 bind group;每次 draw 只有 uniform buffer 里的偏移变化(pass.setBindGroup(0, bindGroup, [i * UNIFORM_SLOT_SIZE]))。WebGPU 要求动态偏移的 uniform 槽 256 字节对齐,所以即使实际 uniform 数据只有 80 字节(一个 mat4x4<f32> + 一个 f32 + 填充),UNIFORM_SLOT_SIZE = 256。
  3. 共享等轴视角,逐立方体高亮。 每个立方体用同一个 viewProj 矩阵(相机在 (2, -2, 2) 看向原点,up = +Z)。唯一变化的逐立方体 uniform 是 highlightedFace,一个 i32,选择片元着色器把哪个面渲染得更亮更实。iso 立方体用 -1,不高亮任何面。
  4. 两条管线,一个 shader。 WGSL 模块含两个顶点和两个片元入口。面管线画半透明三角形,用预乘 alpha 混合;边管线把立方体线框画成 line-list,用 depthCompare: 'always' 让边始终叠在面上可见。面用 depthWriteEnabled: false,边永不被面几何遮挡。
  5. 点击 → 网格单元 → 方向。 canvas 点击处理器把 canvas 分成 4×2 网格,把点击映射到单元格索引,再从 ['iso','top','front','right','left','back','bottom'] 查出方向名。脚本在 canvas 上派发 directionselected CustomEvent,并可选调用 canvas data-onselect 属性指定的全局回调。

透明度分层——未标记面 10%、边 50%、高亮面 65%——让选中的面无需逐面颜色就能突出。高亮面无论朝向如何都用固定浅灰(0.85),所以它在每个立方体里永远是最亮的面。

在你自己的页面上使用

把 /scripts/direction-cubes-webgpu.js 放进你的静态目录,加一个带 nav-dircubes-canvas 类的 canvas,并用 data-onselect 接回调:

example.html
<canvas class="nav-dircubes-canvas"
        data-onselect="onDirSelected"
        style="width:640px;height:160px;"></canvas>
<p id="result"></p>
<script>
  function onDirSelected(dir) {
    document.getElementById('result').textContent =
      'Selected: ' + dir;
  }
</script>
<script src="/scripts/direction-cubes-webgpu.js" defer></script>

回调收到 'iso'、'top'、'front'、'right'、'left'、'back'、'bottom' 之一。也可以直接在 canvas 上监听 directionselected CustomEvent(选中的方向在 event.detail 里)。

用 CSS 定 canvas 尺寸;devicePixelRatio 缩放和深度纹理重设尺寸由脚本内部处理。

完整源码

direction-cubes-webgpu.js
// SPDX-FileCopyrightText: 2026 Uli Köhler <gitlab@techoverflow.net>
// SPDX-License-Identifier: CC0-1.0
//
// Minimal WebGPU "direction cubes" navigation toolbar.
// Renders a 4x2 grid of small isometric cubes on a single canvas. Each cube
// highlights a different face (or none for the iso cube) to indicate which
// view direction it will snap the camera to. Clicking a cube emits a
// 'directionselected' CustomEvent on the canvas.
//
// Auto-initializes every <canvas class="nav-dircubes-canvas"> on the page.
// Optional: set data-onselect="myCallback" on the canvas to receive the
// selected direction name as a string ('iso','top','front','right','left',
// 'back','bottom').
//
// Why an IIFE?  We wrap everything in an immediately-invoked function
// expression so that none of the helpers, constants, or the WGSL source
// leak into the global scope.  The script is intended to be included
// verbatim with <script src=... defer>, possibly alongside other scripts
// on the same page, so isolation matters.
(function () {
  'use strict';

  // ─────────────────────────────────────────────────────────────────────
  // Minimal mat4 helpers (column-major, WebGPU NDC z in [0,1])
  // ─────────────────────────────────────────────────────────────────────
  // WebGPU / WGSL stores matrices column-major, i.e. element [col*4+row].
  // We mirror that layout here so we can upload the Float32Array directly
  // to a uniform buffer without any transpose step.
  // We only implement the handful of matrices we need: identity, multiply,
  // perspective, and lookAt.  No dependency on gl-matrix or similar — the
  // goal is a single self-contained file.

  function mat4Identity() {
    const m = new Float32Array(16);
    m[0] = m[5] = m[10] = m[15] = 1;
    return m;
  }

  // Returns a * b in the sense that (a * b) * v applies b first, then a.
  // This is the convention used everywhere in this file: the view-projection
  // is built as proj * view, so a point is transformed view→clip.
  function mat4Multiply(a, b) {
    const r = new Float32Array(16);
    for (let col = 0; col < 4; col++) {
      for (let row = 0; row < 4; row++) {
        let s = 0;
        for (let k = 0; k < 4; k++) s += a[k * 4 + row] * b[col * 4 + k];
        r[col * 4 + row] = s;
      }
    }
    return r;
  }

  // Right-handed perspective projection matrix.
  // The camera looks down -Z, so visible points have z < 0.
  // This is the WebGPU convention: clip space z is in [0, 1] (not [-1, 1]
  // as in OpenGL), which is why m[10] = far/(near-far) and m[14] has the
  // extra near*far term.  Getting this wrong is the #1 source of "my
  // geometry disappeared" bugs when porting WebGL code to WebGPU.
  function mat4Perspective(fovy, aspect, near, far) {
    const f = 1 / Math.tan(fovy / 2);
    const m = new Float32Array(16);
    m[0] = f / aspect;
    m[5] = f;
    m[10] = far / (near - far);
    m[11] = -1;
    m[14] = (far * near) / (near - far);
    return m;
  }

  // Right-handed lookAt matrix: places the camera at 'eye' looking toward
  // 'target' with 'up' as the screen-up direction.  Returns a view matrix
  // (world→view).  eye, target, up are plain {x,y,z} objects.
  //
  // The math:
  //   forward = normalize(eye - target)   (points from target to eye)
  //   right   = normalize(cross(up, forward))
  //   trueUp  = cross(forward, right)     (re-orthogonalized up)
  // The matrix rows are [right | trueUp | forward], and the translation
  // column is -dot(axis, eye) for each axis, which moves the world so the
  // camera sits at the origin.
  function mat4LookAt(eye, target, up) {
    const zx = eye.x - target.x, zy = eye.y - target.y, zz = eye.z - target.z;
    let zl = Math.hypot(zx, zy, zz);
    const fx = zx / zl, fy = zy / zl, fz = zz / zl;
    // right = normalize(cross(up, forward))
    let rx = up.y * fz - up.z * fy;
    let ry = up.z * fx - up.x * fz;
    let rz = up.x * fy - up.y * fx;
    let rl = Math.hypot(rx, ry, rz);
    // Degenerate case: up is parallel to forward.  Fall back to (1,0,0)
    // so we don't produce NaNs.
    if (rl < 1e-6) { rx = 1; ry = 0; rz = 0; rl = 1; }
    rx /= rl; ry /= rl; rz /= rl;
    // trueUp = cross(forward, right) — already unit length.
    const ux = fy * rz - fz * ry;
    const uy = fz * rx - fx * rz;
    const uz = fx * ry - fy * rx;
    const m = mat4Identity();
    m[0] = rx;  m[1] = ux;  m[2] = fx;
    m[4] = ry;  m[5] = uy;  m[6] = fy;
    m[8] = rz;  m[9] = uz;  m[10] = fz;
    m[12] = -(rx * eye.x + ry * eye.y + rz * eye.z);
    m[13] = -(ux * eye.x + uy * eye.y + uz * eye.z);
    m[14] = -(fx * eye.x + fy * eye.y + fz * eye.z);
    return m;
  }

  // ─────────────────────────────────────────────────────────────────────
  // Direction metadata
  // ─────────────────────────────────────────────────────────────────────
  // Each cube in the grid corresponds to one view direction.  The cube
  // highlights the face that the camera will be looking at when snapped
  // to that direction.  The 'iso' cube highlights no face (all faces are
  // equally faint) because the isometric view doesn't look straight at
  // any single face.

  // Face indices — these must match the order in which faces are defined
  // in buildCubeFaces() below, because the faceIdx attribute stored in
  // each vertex is compared against these in the fragment shader.
  const FACE_PX = 0, FACE_NX = 1, FACE_PY = 2, FACE_NY = 3, FACE_PZ = 4, FACE_NZ = 5;

  // Which face to highlight for each direction (-1 = none / iso).
  // The mapping is intuitive: 'top' looks down at the +Z face, 'front'
  // looks at the -Y face (because the camera looks down -Y in our
  // coordinate system), etc.
  const HIGHLIGHT = {
    iso:    -1,
    top:    FACE_PZ,
    bottom: FACE_NZ,
    front:  FACE_NY,
    back:   FACE_PY,
    right:  FACE_PX,
    left:   FACE_NX,
  };

  // Grid layout: 4 columns x 2 rows = 8 cells, but we only use 7
  // (the 8th cell is left empty).  The order of DIRECTIONS determines
  // which cube appears in which cell, left-to-right, top-to-bottom.
  const COLS = 4, ROWS = 2;
  const DIRECTIONS = ['iso', 'top', 'front', 'right', 'left', 'back', 'bottom'];

  // All cubes share the same isometric view; only the highlighted face
  // differs.  The eye position (2, -2, 2) looks at the origin from the
  // front-right-top corner, which is the standard CAD isometric view.
  // Up = +Z so the Z axis points up on screen.
  const ISO_EYE = { x: 2, y: -2, z: 2 };
  const ISO_UP  = { x: 0, y: 0, z: 1 };

  // Styling constants.  The cubes are rendered semi-transparent so they
  // look like ghosted wireframe boxes with one highlighted face, similar
  // to the navigation cube in FreeCAD / Fusion 360.
  const GRAY = [0.6, 0.6, 0.6];
  const ALPHA_EDGE = 0.5;     // edges — most visible
  const ALPHA_FACE = 0.1;     // normal faces — barely visible
  const ALPHA_MARKED = 0.65;  // highlighted face — clearly visible

  // ─────────────────────────────────────────────────────────────────────
  // Cube geometry: 6 faces x 4 verts (pos, normal, faceIdx) + 36 indices
  // ─────────────────────────────────────────────────────────────────────
  // Each face is a quad (4 vertices) with an outward normal and a faceIdx
  // attribute.  The faceIdx is what the fragment shader uses to decide
  // whether this face is the highlighted one for the current cube.
  //
  // The vertex layout per vertex is 7 floats:
  //   [px, py, pz,  nx, ny, nz,  faceIdx]
  // = 28 bytes, matching arrayStride: 7*4 in the pipeline.

  function buildCubeFaces() {
    const S = 0.5; // half-edge length → cube spans [-0.5, 0.5] on each axis
    // Each face: 4 verts, [px,py,pz, nx,ny,nz, faceIdx]
    // The winding is chosen so that triangles face outward, but since we
    // render with cullMode: 'none' it doesn't strictly matter.
    const data = [
      // +X (right) - faceIdx 0
      [ S,-S,-S,  1, 0, 0, 0], [ S, S,-S,  1, 0, 0, 0], [ S, S, S,  1, 0, 0, 0], [ S,-S, S,  1, 0, 0, 0],
      // -X (left) - faceIdx 1
      [-S,-S, S, -1, 0, 0, 1], [-S, S, S, -1, 0, 0, 1], [-S, S,-S, -1, 0, 0, 1], [-S,-S,-S, -1, 0, 0, 1],
      // +Y (back) - faceIdx 2
      [-S, S,-S,  0, 1, 0, 2], [-S, S, S,  0, 1, 0, 2], [ S, S, S,  0, 1, 0, 2], [ S, S,-S,  0, 1, 0, 2],
      // -Y (front) - faceIdx 3
      [-S,-S, S,  0,-1, 0, 3], [ S,-S, S,  0,-1, 0, 3], [ S,-S,-S,  0,-1, 0, 3], [-S,-S,-S,  0,-1, 0, 3],
      // +Z (top) - faceIdx 4
      [-S,-S, S,  0, 0, 1, 4], [-S, S, S,  0, 0, 1, 4], [ S, S, S,  0, 0, 1, 4], [ S,-S, S,  0, 0, 1, 4],
      // -Z (bottom) - faceIdx 5
      [ S,-S,-S,  0, 0,-1, 5], [ S, S,-S,  0, 0,-1, 5], [-S, S,-S,  0, 0,-1, 5], [-S,-S,-S,  0, 0,-1, 5],
    ];
    // Flatten the nested array into a contiguous Float32Array.
    const verts = new Float32Array(data.length * 7);
    for (let i = 0; i < data.length; i++) verts.set(data[i], i * 7);
    // 6 faces × 2 triangles × 3 indices = 36 indices.
    // Each face's 4 vertices are split into two triangles: (0,1,2) and (0,2,3).
    const indices = new Uint32Array([
      0,1,2, 0,2,3,    4,5,6, 4,6,7,    8,9,10, 8,10,11,
      12,13,14, 12,14,15,  16,17,18, 16,18,19,  20,21,22, 20,22,23,
    ]);
    return { vertices: verts, indices };
  }

  // 12 edges × 2 endpoints = 24 line vertices.
  // The edges are the cube's wireframe, drawn on top of the faces with
  // higher opacity so the cube outline is always clearly visible.
  function buildCubeEdges() {
    const S = 0.5;
    // 8 corner positions of the cube.
    const c = [
      [-S,-S,-S],[ S,-S,-S],[ S, S,-S],[-S, S,-S], // bottom face (z = -S)
      [-S,-S, S],[ S,-S, S],[ S, S, S],[-S, S, S], // top face    (z = +S)
    ];
    // 12 edges as pairs of corner indices:
    //   4 bottom edges, 4 top edges, 4 vertical edges.
    const edges = [
      [0,1],[1,2],[2,3],[3,0],   // bottom face
      [4,5],[5,6],[6,7],[7,4],   // top face
      [0,4],[1,5],[2,6],[3,7],   // vertical edges
    ];
    // Flatten into a Float32Array of positions (no colors — the edge
    // fragment shader uses a fixed color from the uniform/constants).
    const verts = new Float32Array(edges.length * 2 * 3);
    let i = 0;
    for (const [a, b] of edges) {
      verts[i++] = c[a][0]; verts[i++] = c[a][1]; verts[i++] = c[a][2];
      verts[i++] = c[b][0]; verts[i++] = c[b][1]; verts[i++] = c[b][2];
    }
    return verts;
  }

  // ─────────────────────────────────────────────────────────────────────
  // WGSL shader
  // ─────────────────────────────────────────────────────────────────────
  // One shader module, two pipelines (faces + edges).  The shader has
  // four entry points: vs_face/fs_face for the semi-transparent cube
  // faces, and vs_edge/fs_edge for the wireframe edges.
  //
  // The uniform struct contains:
  //   viewProj       — the view-projection matrix (same for all cubes)
  //   highlightedFace — which face index to highlight (-1 = none)
  //
  // The ${...} template literals below are interpolated by JavaScript at
  // shader creation time, baking the opacity/color constants directly
  // into the WGSL source.  This avoids extra uniforms and keeps the
  // per-frame uniform data minimal (just viewProj + highlightedFace).
  const SHADER = /* wgsl */ `
struct Uniforms {
  viewProj: mat4x4<f32>,
  highlightedFace: f32,
  _pad0: f32,
  _pad1: f32,
  _pad2: f32,
};
@group(0) @binding(0) var<uniform> uniforms: Uniforms;

// ── Face pipeline ──
// Each face vertex carries a position, a normal (for lighting), and a
// faceIdx (to check if this face is the highlighted one).
struct FaceVertexInput {
  @location(0) position: vec3<f32>,
  @location(1) normal: vec3<f32>,
  @location(2) faceIdx: f32,
};
struct FaceVertexOutput {
  @builtin(position) clipPosition: vec4<f32>,
  @location(0) normal: vec3<f32>,
  @location(1) faceIdx: f32,
};
@vertex
fn vs_face(input: FaceVertexInput) -> FaceVertexOutput {
  var out: FaceVertexOutput;
  out.clipPosition = uniforms.viewProj * vec4<f32>(input.position, 1.0);
  out.normal = input.normal;
  out.faceIdx = input.faceIdx;
  return out;
}
@fragment
fn fs_face(input: FaceVertexOutput) -> @location(0) vec4<f32> {
  let faceIdx = i32(input.faceIdx);
  let highlighted = i32(uniforms.highlightedFace);
  var alpha = ${ALPHA_FACE.toFixed(2)};
  var color: vec3<f32>;
  if (highlighted >= 0 && faceIdx == highlighted) {
    // Highlighted face: fixed light color so it is always clearly the
    // lightest face, regardless of which face it is or its orientation
    // relative to the light direction.  Without this, a highlighted
    // face that happens to face away from the light would look darker
    // than an unhighlighted face facing toward it, which is confusing.
    color = vec3<f32>(0.85, 0.85, 0.85);
    alpha = ${ALPHA_MARKED.toFixed(2)};
  } else {
    // Normal faces: simple Lambertian shading with a fixed light
    // direction.  The 0.5 ambient term ensures even back-facing faces
    // are partially visible.
    let lightDir = normalize(vec3<f32>(0.4, -0.4, 0.8));
    let ndotl = max(dot(normalize(input.normal), lightDir), 0.0);
    let base = vec3<f32>(${GRAY[0].toFixed(1)}, ${GRAY[1].toFixed(1)}, ${GRAY[2].toFixed(1)});
    color = base * (0.5 + 0.5 * ndotl);
  }
  // Premultiplied alpha: the pipeline blend state expects color values
  // to be multiplied by alpha before output.  This is why we return
  // (color * alpha, alpha) rather than (color, alpha).
  return vec4<f32>(color * alpha, alpha);
}

// ── Edge pipeline ──
// Edges only need a position; the color is fixed (derived from GRAY
// and ALPHA_EDGE, baked in at compile time).
struct EdgeVertexInput {
  @location(0) position: vec3<f32>,
};
struct EdgeVertexOutput {
  @builtin(position) clipPosition: vec4<f32>,
};
@vertex
fn vs_edge(input: EdgeVertexInput) -> EdgeVertexOutput {
  var out: EdgeVertexOutput;
  out.clipPosition = uniforms.viewProj * vec4<f32>(input.position, 1.0);
  return out;
}
@fragment
fn fs_edge(input: EdgeVertexOutput) -> @location(0) vec4<f32> {
  let alpha = ${ALPHA_EDGE.toFixed(2)};
  let base = vec3<f32>(${GRAY[0].toFixed(1)}, ${GRAY[1].toFixed(1)}, ${GRAY[2].toFixed(1)});
  // Premultiplied alpha, same as faces.
  return vec4<f32>(base * alpha, alpha);
}
`;

  // ─────────────────────────────────────────────────────────────────────
  // Dynamic uniform offset constant
  // ─────────────────────────────────────────────────────────────────────
  // WebGPU requires that uniform buffer offsets used with dynamic offset
  // bind groups be multiples of 256 bytes.  Our actual uniform data is
  // only 80 bytes (one mat4x4 + one f32 + padding), but we must pad each
  // slot to 256 bytes.  The uniform buffer is therefore allocated as
  // 256 * 7 = 1792 bytes, with each cube's data at offset i * 256.
  const UNIFORM_SLOT_SIZE = 256;

  // ─────────────────────────────────────────────────────────────────────
  // Per-canvas initialization
  // ─────────────────────────────────────────────────────────────────────
  // Called once for each <canvas class="nav-dircubes-canvas"> on the page.
  // Sets up the WebGPU device, pipelines, geometry buffers, click handler,
  // and starts the render loop.  All GPU resources are captured in the
  // closure so the render loop can access them without global state.

  async function initCanvas(canvas) {
    // --- WebGPU bootstrap ---
    // navigator.gpu is the entry point.  If it's missing, the browser
    // does not support WebGPU at all.  We replace the canvas with a text
    // node so the page doesn't show a broken empty rectangle.
    if (!navigator.gpu) {
      canvas.replaceWith(document.createTextNode('WebGPU is not supported in this browser.'));
      return;
    }
    const adapter = await navigator.gpu.requestAdapter();
    if (!adapter) {
      canvas.replaceWith(document.createTextNode('No WebGPU adapter available.'));
      return;
    }
    const device = await adapter.requestDevice();
    // Configure the canvas's WebGPU context.  alphaMode: 'premultiplied'
    // lets the canvas blend with the page background — important here
    // because we clear to transparent and want the canvas background to
    // show through between the cube grid cells.
    const ctx = canvas.getContext('webgpu');
    const format = navigator.gpu.getPreferredCanvasFormat();
    ctx.configure({ device, format, alphaMode: 'premultiplied' });

    // Compile the WGSL shader and build the geometry.
    const shader = device.createShaderModule({ code: SHADER });
    const faces = buildCubeFaces();
    const edges = buildCubeEdges();

    // --- Upload geometry to GPU buffers ---
    // All geometry is static — uploaded once, never modified.

    // Face vertex buffer: 24 vertices × 7 floats × 4 bytes = 672 bytes.
    const faceVbuf = device.createBuffer({
      size: faces.vertices.byteLength,
      usage: GPUBufferUsage.VERTEX | GPUBufferUsage.COPY_DST,
    });
    device.queue.writeBuffer(faceVbuf, 0, faces.vertices);
    // Edge vertex buffer: 24 vertices × 3 floats × 4 bytes = 288 bytes.
    const edgeVbuf = device.createBuffer({
      size: edges.byteLength,
      usage: GPUBufferUsage.VERTEX | GPUBufferUsage.COPY_DST,
    });
    device.queue.writeBuffer(edgeVbuf, 0, edges);
    // Index buffer for faces: 36 uint32 indices.
    const ibuf = device.createBuffer({
      size: faces.indices.byteLength,
      usage: GPUBufferUsage.INDEX | GPUBufferUsage.COPY_DST,
    });
    device.queue.writeBuffer(ibuf, 0, faces.indices);

    // --- Uniform buffer ---
    // One 256-byte slot per cube, 7 cubes total = 1792 bytes.
    // Each frame we write each cube's viewProj + highlightedFace into
    // its slot, then use dynamic offsets to select the right slot per
    // draw call.
    const ubuf = device.createBuffer({
      size: UNIFORM_SLOT_SIZE * DIRECTIONS.length,
      usage: GPUBufferUsage.UNIFORM | GPUBufferUsage.COPY_DST,
    });

    // --- Bind group with dynamic offset ---
    // We create a SINGLE bind group that references the entire uniform
    // buffer.  At draw time we pass a dynamic offset (i * 256) to select
    // which cube's data to use.  This is much cheaper than creating 7
    // separate bind groups and is the idiomatic WebGPU pattern for
    // rendering many instances with per-instance uniforms.
    //
    // hasDynamicOffset: true tells WebGPU that the offset will be
    // supplied at setBindGroup() time rather than being fixed at bind
    // group creation time.
    const bindGroupLayout = device.createBindGroupLayout({
      entries: [{
        binding: 0,
        visibility: GPUShaderStage.VERTEX | GPUShaderStage.FRAGMENT,
        buffer: { type: 'uniform', hasDynamicOffset: true },
      }],
    });
    const bindGroup = device.createBindGroup({
      layout: bindGroupLayout,
      entries: [{ binding: 0, resource: { buffer: ubuf, offset: 0, size: UNIFORM_SLOT_SIZE } }],
    });

    // --- Blend state ---
    // Premultiplied alpha blending: the fragment shader outputs
    // (color * alpha, alpha), and the blend state uses srcFactor: 'one'
    // (not 'src-alpha') to match.  This is the correct blend setup for
    // premultiplied alpha and avoids double-darkening at overlap edges.
    const blendState = {
      color: { srcFactor: 'one', dstFactor: 'one-minus-src-alpha', operation: 'add' },
      alpha: { srcFactor: 'one', dstFactor: 'one-minus-src-alpha', operation: 'add' },
    };

    // --- Pipelines ---
    // Two pipelines sharing the same bind group layout and shader module:
    //   facePipeline — renders semi-transparent triangles for cube faces
    //   edgePipeline — renders the wireframe edges as lines
    //
    // The face pipeline uses depthCompare: 'less' so that closer faces
    // occlude farther ones (correct depth ordering), but
    // depthWriteEnabled: false so faces don't write depth — this allows
    // the edges (drawn after faces) to always pass the depth test.
    //
    // The edge pipeline uses depthCompare: 'always' so edges are never
    // occluded by face geometry, giving the cube a clean wireframe
    // outline regardless of viewing angle.
    const facePipeline = device.createRenderPipeline({
      layout: device.createPipelineLayout({ bindGroupLayouts: [bindGroupLayout] }),
      vertex: {
        module: shader, entryPoint: 'vs_face',
        // Vertex layout: 7 floats per vertex = 28 bytes.
        //   offset 0:  position (float32x3)
        //   offset 12: normal   (float32x3)
        //   offset 24: faceIdx  (float32)
        buffers: [{
          arrayStride: 7 * 4,
          attributes: [
            { shaderLocation: 0, offset: 0,  format: 'float32x3' },
            { shaderLocation: 1, offset: 12, format: 'float32x3' },
            { shaderLocation: 2, offset: 24, format: 'float32' },
          ],
        }],
      },
      fragment: {
        module: shader, entryPoint: 'fs_face',
        targets: [{ format, blend: blendState }],
      },
      primitive: { topology: 'triangle-list', cullMode: 'none' },
      depthStencil: { format: 'depth24plus', depthCompare: 'less', depthWriteEnabled: false },
    });

    const edgePipeline = device.createRenderPipeline({
      layout: device.createPipelineLayout({ bindGroupLayouts: [bindGroupLayout] }),
      vertex: {
        module: shader, entryPoint: 'vs_edge',
        // Vertex layout: 3 floats per vertex = 12 bytes (position only).
        buffers: [{ arrayStride: 12, attributes: [{ shaderLocation: 0, offset: 0, format: 'float32x3' }] }],
      },
      fragment: {
        module: shader, entryPoint: 'fs_edge',
        targets: [{ format, blend: blendState }],
      },
      primitive: { topology: 'line-list' },
      depthStencil: { format: 'depth24plus', depthCompare: 'always', depthWriteEnabled: false },
    });

    // --- Depth texture ---
    // Recreated whenever the canvas size changes.  Even though edges use
    // depthCompare: 'always', the face pipeline uses depthCompare: 'less'
    // and thus needs a valid depth attachment.
    let depthTex = null;
    function ensureDepth(w, h) {
      if (depthTex && depthTex.width === w && depthTex.height === h) return;
      if (depthTex) depthTex.destroy();
      depthTex = device.createTexture({
        size: [w, h, 1], format: 'depth24plus', usage: GPUTextureUsage.RENDER_ATTACHMENT,
      });
    }

    // --- Click handling: map canvas coords to grid cell → direction ---
    // The canvas is divided into a COLS×ROWS grid.  A click anywhere in
    // cell (col, row) selects the direction at index row*COLS + col.
    // This is a simple bounding-box hit test — no per-pixel picking
    // needed, which keeps the code simple and fast.
    function hitTest(clientX, clientY) {
      const rect = canvas.getBoundingClientRect();
      const x = clientX - rect.left;
      const y = clientY - rect.top;
      const cellW = rect.width / COLS;
      const cellH = rect.height / ROWS;
      const col = Math.floor(x / cellW);
      const row = Math.floor(y / cellH);
      const idx = row * COLS + col;
      // idx 7 (the 8th cell) is empty, so reject it.
      if (idx < 0 || idx >= DIRECTIONS.length) return null;
      return DIRECTIONS[idx];
    }
    canvas.style.cursor = 'pointer';
    canvas.addEventListener('click', (e) => {
      const dir = hitTest(e.clientX, e.clientY);
      if (!dir) return;
      // Dispatch a CustomEvent so callers can use addEventListener.
      canvas.dispatchEvent(new CustomEvent('directionselected', { detail: dir }));
      // Also support the data-onselect attribute for simple use cases
      // where the caller just wants to pass a global callback name.
      const cbName = canvas.getAttribute('data-onselect');
      if (cbName && typeof window[cbName] === 'function') window[cbName](dir);
    });

    // --- Render loop ---
    // Runs once per animation frame.  Each frame:
    //   1. Resize canvas + depth texture if the CSS size changed.
    //   2. Compute the shared view-projection matrix (same for all cubes).
    //   3. Write per-cube uniform data (viewProj + highlightedFace).
    //   4. Record a single render pass with 7 cubes, each in its own
    //      viewport cell, drawn as faces then edges.
    //   5. Submit and schedule the next frame.
    function frame() {
      // Handle HiDPI: render at devicePixelResolution but cap at 2×.
      const dpr = Math.min(window.devicePixelRatio || 1, 2);
      const cw = Math.max(1, Math.floor(canvas.clientWidth * dpr));
      const ch = Math.max(1, Math.floor(canvas.clientHeight * dpr));
      if (canvas.width !== cw || canvas.height !== ch) {
        canvas.width = cw; canvas.height = ch;
      }
      ensureDepth(cw, ch);

      // Each cube occupies one cell of the grid.  The viewport and
      // scissor rect for each cube are set to its cell's pixel bounds.
      const cellW = cw / COLS;
      const cellH = ch / ROWS;
      // The aspect ratio for the perspective projection is per-cell,
      // not per-canvas, because each cube is rendered into its own
      // square-ish viewport.
      const aspect = cellW / cellH;
      // All cubes share the same isometric view.  Only the highlighted
      // face differs per cube, and that's a uniform, not a matrix.
      const view = mat4LookAt(ISO_EYE, { x: 0, y: 0, z: 0 }, ISO_UP);
      const proj = mat4Perspective(35 * Math.PI / 180, aspect, 0.1, 10);
      const viewProj = mat4Multiply(proj, view);

      // Write per-cube uniform data.  Each cube gets its own 256-byte
      // slot in the uniform buffer.  We only write the first 20 floats
      // (80 bytes): 16 for viewProj + 1 for highlightedFace + 3 padding.
      // The rest of the 256-byte slot is unused but must be allocated
      // due to the 256-byte alignment requirement for dynamic offsets.
      const slot = new Float32Array(UNIFORM_SLOT_SIZE / 4);
      for (let i = 0; i < DIRECTIONS.length; i++) {
        slot.set(viewProj, 0);
        slot[16] = HIGHLIGHT[DIRECTIONS[i]];
        // writeBuffer with offset=i*256, data=slot, length=20 floats=80 bytes.
        device.queue.writeBuffer(ubuf, i * UNIFORM_SLOT_SIZE, slot, 0, 20);
      }

      // Record the render pass.  Clear to transparent so the canvas
      // background shows through between and around the cubes.
      const encoder = device.createCommandEncoder();
      const pass = encoder.beginRenderPass({
        colorAttachments: [{
          view: ctx.getCurrentTexture().createView(),
          clearValue: { r: 0, g: 0, b: 0, a: 0 },
          loadOp: 'clear', storeOp: 'store',
        }],
        depthStencilAttachment: {
          view: depthTex.createView(),
          depthClearValue: 1.0, depthLoadOp: 'clear', depthStoreOp: 'store',
        },
      });

      // Draw each cube into its grid cell.
      // The key technique here: setViewport + setScissorRect restrict
      // rendering to the cell's pixel bounds, then the dynamic offset
      // in setBindGroup selects the per-cube uniform data.  All 7 cubes
      // are drawn in a single render pass, which is much more efficient
      // than 7 separate passes.
      for (let i = 0; i < DIRECTIONS.length; i++) {
        const col = i % COLS;
        const row = Math.floor(i / COLS);
        // Viewport: maps NDC [-1,1] to the cell's pixel rectangle.
        // Scissor: clips rasterization to the same rectangle, so cubes
        // never bleed into neighboring cells.
        pass.setViewport(col * cellW, row * cellH, cellW, cellH, 0, 1);
        pass.setScissorRect(col * cellW, row * cellH, cellW, cellH);

        // Draw faces: 36 indices (6 faces × 2 triangles × 3 indices).
        // The dynamic offset [i * 256] selects this cube's uniform slot.
        pass.setPipeline(facePipeline);
        pass.setBindGroup(0, bindGroup, [i * UNIFORM_SLOT_SIZE]);
        pass.setVertexBuffer(0, faceVbuf);
        pass.setIndexBuffer(ibuf, 'uint32');
        pass.drawIndexed(faces.indices.length);

        // Draw edges: 24 vertices (12 edges × 2 endpoints).
        // Same dynamic offset — the edge shader also reads viewProj
        // from the uniform buffer.
        pass.setPipeline(edgePipeline);
        pass.setBindGroup(0, bindGroup, [i * UNIFORM_SLOT_SIZE]);
        pass.setVertexBuffer(0, edgeVbuf);
        pass.draw(edges.length / 3);
      }
      pass.end();
      device.queue.submit([encoder.finish()]);
      requestAnimationFrame(frame);
    }
    requestAnimationFrame(frame);
  }

  // ─────────────────────────────────────────────────────────────────────
  // Auto-initialization
  // ─────────────────────────────────────────────────────────────────────
  // Find every <canvas class="nav-dircubes-canvas"> on the page and
  // initialize it.  If the document is still loading (script ran from
  // <head> or with defer), wait for DOMContentLoaded so the canvases
  // exist.  If the document is already ready (script injected late),
  // initialize immediately.
  function initAll() {
    document.querySelectorAll('canvas.nav-dircubes-canvas').forEach(initCanvas);
  }
  if (document.readyState === 'loading') {
    document.addEventListener('DOMContentLoaded', initAll);
  } else {
    initAll();
  }
})();

该脚本与上面的内联代码完全相同,均以 CC0-1.0 发布。这里的版本是精简零依赖移植,保留了让这个组件渲染成本低的两个关键技术(WebGPU viewport 切网格单元、动态 uniform 偏移供逐立方体数据)。


按类别查看类似文章: JavaScript WebGPU Web